Home/Locations/San Juan Pueblo, NM/Whole House Rewiring

Whole House Rewiring in San Juan Pueblo, NM

Old wiring wasn't built for the way homes use power now. If your house has knob and tube, aluminum branch wiring, cloth-covered cable or no ground at the outlets, whole house rewiring in San Juan Pueblo replaces it with modern copper circuits, grounded outlets and proper protection. Lebogang Electrical Services rewires homes across Rio Arriba County, room by room, so you can usually stay in the house.

Call (888) 633-7804 All services in San Juan Pueblo

Whole House Rewiring in San Juan Pueblo: what's included

Complete home rewiring with new copper cable
Knob and tube and cloth wiring removed from service
Aluminum wiring replacement or connection repair
Grounded outlets with GFCI and AFCI protection
A new panel and circuits sized for modern loads
Staged work so you can stay in the house

Knob and tube wiring replacement in San Juan Pueblo

Knob and tube wiring, found in homes built before the 1940s, has no ground and insulation that turns brittle with age. It was never meant to be buried in attic insulation or to feed modern loads. Our knob and tube wiring replacement in San Juan Pueblo removes it from service and runs new grounded cable to every outlet, switch and light.

Aluminum wiring replacement in San Juan Pueblo

Homes built from the mid-1960s to the mid-1970s may have aluminum branch wiring, which loosens at connections and overheats. We offer full aluminum wiring replacement, or repair at every connection with connectors made for joining aluminum to copper, depending on the house and the budget.

Whole house rewiring cost in San Juan Pueblo

Whole house rewiring cost comes down to square footage, wall and ceiling construction, attic and crawlspace access and how many circuits you want. Adobe, block and flat-roof homes take more labor than frame houses with an open attic. After a walkthrough we price the full electrical rewiring job, including patching where we open walls.

Signs it's time to rewire a house in San Juan Pueblo

Two-prong outlets and no ground wire
Cloth-covered or crumbling wire insulation
Aluminum wiring marked AL on the cable jacket
Scorched outlets or frequent blown fuses
An insurer or home inspector flagged the wiring

Electrical work in San Juan Pueblo and Rio Arriba County

Historic adobe homes in Rio Arriba County often have wiring in surface raceway or buried in plaster, with decades of add-ons spliced in. Repair and rewiring here means protecting original plaster, vigas and woodwork while bringing the circuits up to current safety standards.

Electric service in Rio Arriba County is typically provided by Jemez Mountains Electric Cooperative, Northern Rio Arriba Electric Cooperative or Kit Carson Electric Cooperative, depending on your address. When a job involves the meter or the service wires, we coordinate the disconnect and reconnect with them. We provide whole house rewiring across San Juan Pueblo (ZIP code 87566) and in nearby Alcalde, Hernandez, Espanola, Santa Cruz and Chimayo.

How it works

Call (888) 633-7804Tell us what's happening at your San Juan Pueblo property. Emergencies are dispatched straight away. Everything else gets a time that suits you.
Get a price firstThe electrician looks at the job, explains what's needed in plain language and gives you the price before starting.
We do the workWiring is installed to current electrical code, with materials chosen for the location and the load.
Tested and explainedEverything is tested, the panel is labeled where it applies, and the work area is left clean.

Whole House Rewiring FAQ for San Juan Pueblo

How much does it cost to rewire a house in San Juan Pueblo?

It varies widely with the size and construction of the house. Access matters most: an open attic or crawlspace makes the job faster. We walk the house and give you a written price.

Do I have to move out during rewiring?

Usually not. We work in sections and restore power to the lived-in parts of the house at the end of each day.

Do you have to tear open the walls?

We fish cable through attics, crawlspaces and wall cavities wherever possible and cut small access holes only where needed. Solid adobe and block walls sometimes call for surface raceway or channeling.

Can I rewire part of the house now and the rest later?

Yes. Many owners start with the kitchen, bathrooms and panel, then do bedrooms and living areas in a second phase.

What customers say

Our adobe had wiring from who knows when. They rewired it in stages so we could stay in the house and were careful with the plaster. Everything is grounded now.
Angela M. Whole house rewiring

They checked the panel first, explained the options and installed our Level 2 charger in the garage in an afternoon. Price was exactly what they quoted.
Tanya L. EV charger

They did the electrical for our restaurant build-out and worked nights so we could keep the other side open. Showed up when they said they would, every time.
Carlos V. Commercial

Serving San Juan Pueblo, NM