24/7 emergency line (888) 633-7804
Call (888) 633-7804

Home/Locations/Crownpoint, NM/Whole House Rewiring

Whole House Rewiring in Crownpoint, NM

Old wiring wasn't built for the way homes use power now. If your house has knob and tube, aluminum branch wiring, cloth-covered cable or no ground at the outlets, whole house rewiring in Crownpoint replaces it with modern copper circuits, grounded outlets and proper protection. Lebogang Electrical Services rewires homes across McKinley County, room by room, so you can usually stay in the house.

Whole House Rewiring in Crownpoint: what's included

  • Complete home rewiring with new copper cable
  • Knob and tube and cloth wiring removed from service
  • Aluminum wiring replacement or connection repair
  • Grounded outlets with GFCI and AFCI protection
  • A new panel and circuits sized for modern loads
  • Staged work so you can stay in the house

Knob and tube wiring replacement in Crownpoint

Knob and tube wiring, found in homes built before the 1940s, has no ground and insulation that turns brittle with age. It was never meant to be buried in attic insulation or to feed modern loads. Our knob and tube wiring replacement in Crownpoint removes it from service and runs new grounded cable to every outlet, switch and light.

Aluminum wiring replacement in Crownpoint

Homes built from the mid-1960s to the mid-1970s may have aluminum branch wiring, which loosens at connections and overheats. We offer full aluminum wiring replacement, or repair at every connection with connectors made for joining aluminum to copper, depending on the house and the budget.

Whole house rewiring cost in Crownpoint

Whole house rewiring cost comes down to square footage, wall and ceiling construction, attic and crawlspace access and how many circuits you want. Adobe, block and flat-roof homes take more labor than frame houses with an open attic. After a walkthrough we price the full electrical rewiring job, including patching where we open walls.

Signs it's time to rewire a house in Crownpoint

  • Two-prong outlets and no ground wire
  • Cloth-covered or crumbling wire insulation
  • Aluminum wiring marked AL on the cable jacket
  • Scorched outlets or frequent blown fuses
  • An insurer or home inspector flagged the wiring

Electrical work in Crownpoint and McKinley County

Around Crownpoint we see older homes from the railroad and mining years alongside manufactured homes with aging feeders, pedestals and panels. Loose connections, undersized wiring and missing grounds are the usual findings, and all of them are fixable.

Electric service in McKinley County is typically provided by the City of Gallup, Continental Divide Electric Cooperative or the Navajo Tribal Utility Authority, depending on your address. When a job involves the meter or the service wires, we coordinate the disconnect and reconnect with them. We provide whole house rewiring across Crownpoint (ZIP code 87313) and in nearby Smith Lake, Thoreau, Prewitt, Continental Divide and Fort Wingate.

How it works

  1. Call (888) 633-7804Tell us what's happening at your Crownpoint property. Emergencies are dispatched straight away. Everything else gets a time that suits you.
  2. Get a price firstThe electrician looks at the job, explains what's needed in plain language and gives you the price before starting.
  3. We do the workWiring is installed to current electrical code, with materials chosen for the location and the load.
  4. Tested and explainedEverything is tested, the panel is labeled where it applies, and the work area is left clean.

Whole House Rewiring FAQ for Crownpoint

How much does it cost to rewire a house in Crownpoint?

It varies widely with the size and construction of the house. Access matters most: an open attic or crawlspace makes the job faster. We walk the house and give you a written price.

Do I have to move out during rewiring?

Usually not. We work in sections and restore power to the lived-in parts of the house at the end of each day.

Do you have to tear open the walls?

We fish cable through attics, crawlspaces and wall cavities wherever possible and cut small access holes only where needed. Solid adobe and block walls sometimes call for surface raceway or channeling.

Can I rewire part of the house now and the rest later?

Yes. Many owners start with the kitchen, bathrooms and panel, then do bedrooms and living areas in a second phase.

What customers say

Our adobe had wiring from who knows when. They rewired it in stages so we could stay in the house and were careful with the plaster. Everything is grounded now.

Angela M. Whole house rewiring

After a monsoon storm fried our TV and the garage door opener, we had a whole house surge protector put in. In and out in under two hours.

Denise W. Surge protection

Our old panel was full and kept tripping when the air conditioner came on. They upgraded us to 200 amps in one day, labeled every breaker and left the wall cleaner than they found it.

Maria G. Panel upgrade

Serving Crownpoint, NM

Whole House Rewiring in Crownpoint

Tell us what you need. We'll give you a time and a price.

Call (888) 633-7804
Call now: (888) 633-7804